You perform a security audit on a server named Server1. You install the Microsoft Network Monitor 3.0 application on Server1. You find that only some of the captured frames display host mnemonic names in the Source column and the Destination column. All other frames display IP addresses. You need to display mnemonic host names instead of IP addresses for all the frames.
What should you do?（）
A. Create a new display filter and apply the filter to the capture.
B. Create a new capture filter and apply the filter to the capture.
C. Populate the Aliases table and apply the aliases to the capture.
D. Configure the Network Monitor application to enable the Enable Conversations option. Recapture the data to a new file.
您可能感兴趣的试卷
你可能感兴趣的试题
You perform a security audit of a server named CRM1. You want to build a list of all DNS requests that are initiated by the server. You install the Microsoft Network Monitor 3.0 application on CRM1. You capture all local traffic on CRM1 for 24 hours. You save the capture file as data.cap. You find that the size of the file is more than 1 GB. You need to create a file named DNSdata.cap from the existing capture file that contains only DNS-related data.
What should you do? （）
A. Apply the display filter !DNS and save the displayed frames as a DNSdata.cap file.
B. Apply the capture filter DNS and save the displayed frames as a DNSdata.cap file.
C. Add a new alias named DNS to the aliases table and save the file as DNSdata.cap.
D. Run the nmcap.exe /inputcapture data.cap /capture DNS /file DNSdata.cap command.
Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCP
Server server role installed.You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server.You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1.The network interface configuration for the two computers is shown in the following table.
Server1 Computer1
IP address 192.168.2.1 169.254.15.84
MAC address 00-0A-5E-1C-7F-67 00-17-31-D5-5E-FF
You need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1
and Computer1.
Which filter should you use？（）
A. IPv4.Address == 169.254.15.84 && DHCP
B. IPv4.Address == 192.168.2.1 && DHCP
C. Ethernet.Address == 0x000A5E1C7F67 && DHCP
D. Ethernet.Address == 0x001731D55EFF && DHCP
Your company has a main office and a branch office. The branch office has three servers that run a Server Core installation of Windows Server 2008 R2. The servers are named Server1, Server2, and Server3.
You want to configure the Event Logs subscription on Server1 to collect events from Server2 and Server3.
You discover that you cannot create a subscription on Server1 from another computer.
You need to configure a subscription on Server1.
Which two actions should you perform?（）
A. Run the wecutil cs subscription.xml command on Server1.
B. Run the wevtutil im subscription.xml command on Server1.
C. Create an event collector subscription configuration file. Name the file subscription.xml.
D. Create a custom view on Server1 by using Event Viewer. Export the custom view to a file named subscription . xml.
Your company has a network that has an Active Directory domain. The domain has two servers named DC1 and DC2. You plan to collect events from DC2 and transfer them to DC1. You configure the required subscriptions by selecting the Normal option for the Event delivery optimization setting and by using the HTTP protocol.
You discover that none of the subscriptions work.
You need to ensure that the servers support the event collectors.
Which three actions should you perform?（）
A. Run the wecutil qc command on DC1.
B. Run the wecutil qc command on DC2.
C. Run the winrm quickconfig command on DC1.
D. Run the winrm quickconfig command on DC2.
E. Add the DC2 account to the Administrators group on DC1.
F. Add the DC1 account to the Administrators group on DC2.
Your company has an Active Directory domain that has two domain controllers named DC1 and DC2.You prepare both servers to support event subscriptions. On DC1, you create a new default subscription for DC2. You need to review system events for DC2.
Which event log should you select？（）
A. system log on DC1
B. application log on DC2
C. Forwarded Events log on DC1
D. Forwarded Events log on DC2
Your company has a network that has 100 servers. A server named Server1 is configured as a file server. Server1 is connected to a SAN and has 15 logical drives. You want to automatically run a data archiving script if the free space on any of the logical drives is below 30 percent. You need to automate the script execution.
You create a new Data Collector Set. What should you do next?（）
A. Add the Event trace data collector.
B. Add the Performance counter alert.
C. Add the Performance counter data collector.
D. Add the System configuration information data collector.
Your company has a network that has 100 servers. You install a new server that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed. After a week, you discover that the Reliability Monitor has no data, and that the Systems Stability chart has never been updated.You need to configure the server to collect the Reliability Monitor data.
What should you do？（）
A. Run the perfmon.exe /sys command on the server.
B. Configure the Task Scheduler service to start automatically.
C. Configure the Remote Registry service to start automatically.
D. Configure the Secondary Logon service to start automatically.
Your network consists of a single Active Directory domain. All servers run Windows Server 2008 R2.You have a server named Server1 that hosts shared documents. Users report extremely slow response times when they try to open the shared documents on Server1.You log on to Server1 and observe real-time data indicating that the processor is operating at 100 percent of capacity.You need to gather additional data to diagnose the cause of the problem.
What should you do?（）
A. In the Performance Monitor console, create a counter log to track processor usage.
B. In Event Viewer, open and review the application log for Performance events.
C. In Resource Monitor, use the Resource View to see the percentage of processor capacity used by each application.
D. In Performance Monitor, create performance counter alert that will be triggered when processor usage exceeds 80 percent for more than five minutes on Server1.
You have 10 standalone servers that run Windows Server 2008 R2.
You install the Windows Server Update Services (WSUS) server role on a server named Server1.
You need to configure all of the servers to receive updates from Server1.
What should you do？（）
A. Configure the Windows Update settings on each server by using the Control Panel.
B. Run the wuauclt.exe /detectnow command on each server.
C. Run the wuauclt.exe /reauthorization command on each server.
D. Configure the Windows Update settings on each server by using a local group policy.
Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1runs Windows Server 2008 R2. Server1 is located on the company intranet.
You configure the WSUS Web site to use SSL.
You need to configure a Group Policy object (GPO) to specify the intranet update locations.
Which URLs should you use?（）
A. http: //SERVER1
B. http: //SERVER1:8080
C. https: //SERVER1
D. https: //SERVER1:8080
最新试题
Your company has a server named FS1. FS1 hosts the domain-based DFS namespace named \\contoso. com\dfs all domain users store their data in subfolders within the DFS namespace. You need to prevent all users except administrators， from creating new folders or new files at the root of the \\contoso.com\dfs share. What should you do（）？
Your company has a network that has 100 servers. You install a new server that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed. After a week, you discover that the Reliability Monitor has no data, and that the Systems Stability chart has never been updated.You need to configure the server to collect the Reliability Monitor data.What should you do？（）
Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.You need to reduce the number of events registered in the system log on Printer1. What should you do?（）
Your company has a network that has 100 servers. A server named Server1 is configured as a file server. Server1 is connected to a SAN and has 15 logical drives. You want to automatically run a data archiving script if the free space on any of the logical drives is below 30 percent. You need to automate the script execution.You create a new Data Collector Set. What should you do next?（）
Your company has a network that has an Active Directory domain. The domain has two servers named DC1 and DC2. You plan to collect events from DC2 and transfer them to DC1. You configure the required subscriptions by selecting the Normal option for the Event delivery optimization setting and by using the HTTP protocol.You discover that none of the subscriptions work.You need to ensure that the servers support the event collectors.Which three actions should you perform?（）
Your company has an Active Directory domain that has two domain controllers named DC1 and DC2.You prepare both servers to support event subscriptions. On DC1, you create a new default subscription for DC2. You need to review system events for DC2.Which event log should you select？（）
Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1runs Windows Server 2008 R2. Server1 is located on the company intranet. You configure the WSUS Web site to use SSL.You need to configure a Group Policy object (GPO) to specify the intranet update locations.Which URLs should you use?（）
Your company has users who connect remotely to the main office though a Windows Server 2008 VPN server. You need to ensure that users cannot access the VPN server remotely from 22：00 to 05：00. What should you do()？
You manage a server that runs Windows Server 2008. The windows backup and restore utility is installed ont he server. You nede to create a full backup of all system state data to the DVD drive （R： drive） on the server. Which command should you run on the server（）？
You perform a security audit of a server named CRM1. You want to build a list of all DNS requests that are initiated by the server. You install the Microsoft Network Monitor 3.0 application on CRM1. You capture all local traffic on CRM1 for 24 hours. You save the capture file as data.cap. You find that the size of the file is more than 1 GB. You need to create a file named DNSdata.cap from the existing capture file that contains only DNS-related data.What should you do? （）