Your company has a single Active Directory domain. The company has a main office and a branchoffice. Both the offices have domain controllers that run Active Directory-integrated DNS zones. All client computers are configured to use the local domain controllers for DNS resolution. The domain controllers at the branch office location are configured as Read-Only Domain Controllers (RODC).You change the IP address of an existing server named SRV2 in the main office. You need the branch office DNS servers to reflect the change immediately.
What should you do？（）
A. Run the dnscmd /ZoneUpdateFromDs command on the branch office servers.
B. Run the dnscmd /ZoneUpdateFromDs command on a domain controller in the main office.
C. Change the domain controllers at the branch offices from RODCs to standard domain controllers.
D. Decrease the Minimum (default) TTL option to 15 minutes on the Start of Authority (SOA) record for the zone.
您可能感兴趣的试卷
你可能感兴趣的试题
Your company has a main office and a branch office. The main office has a domain controller named DC1 that hosts a DNS primary zone. The branch office has a DNS server named SRV1 that hosts a DNS secondary zone. All client computers are configured to use their local server for DNS resolution. You change the IP address of an existing server named SRV2 in the main office.You need to ensure that SRV1 reflects the change immediately.
What should you do？（）
A. Restart the DNS Server service on DC1.
B. Run the dnscmd command by using the /zonerefresh option on DC1.
C. Run the dnscmd command by using the /zonerefresh option on SRV1.
D. Set the refresh interval to 10 minutes on the Start of Authority (SOA) record.
Your company has a main office and two branch offices. Domain controllers in the main office host an Active Directory-integrated zone.The DNS servers in the branch offices host a secondary zone for the domain and use the main office DNS servers as their DNS Master servers for the zone.The company adds a new branch office. You add a member server named Branch3 and install the DNS Server server role on the server. You configure a secondary zone for the domain. The zone transfer fails.You need to configure DNS to provide zone data to the DNS server in the new branch office.
What should you do？（）
A. Run dnscmd by using the ZoneResetMasters option.
B. Run dnscmd by using the ZoneResetSecondaries option.
C. Add the new DNS server to the Zone Transfers tab on one of the DNS servers in the main office.
D. Add the new DNS server to the DNSUpdateProxy Global security group in Active Directory Users and Computers.
Your company has a domain controller named Server1 that runs Windows Server 2008 R2. Server1 has the DNS Server server role installed.You need to configure the DNS server to resolve IP addresses to host names.
Which record should you create？（）
A. Pointer (PTR)
B. Host Info (HINFO)
C. Service Location (SRV)
D. Canonical Name (CNAME)
Your company has a domain controller named Server1 that runs Windows Server 2008 R2 and the DNS Server server role. A server named Server2 runs a custom application. You need to configure DNS to include the following parameters for the custom application:
¡¤Servic
¡¤Priorit
¡¤Weigh
¡¤Protoco
¡¤Port numbe
¡¤Host offering this servic
Which record should you create？（）
A. Host Info (HINFO)
B. Service Location (SRV)
C. Canonical Name (CNAME)
D. Well-Known Service (WKS)
Your company has a domain controller named Server1 that runs Windows Server 2008 R2 and the DNS server role. A server named Server2 runs Windows Server 2003 and Microsoft Exchange Server 2007. The company wants to deploy a new Exchange server named Server3 to receive all inbound e-mail traffic. You need to configure DNS to direct incoming e-mail traffic to the Exchange servers. You also need to ensure that higher priority is given to Server3.
What should you do？（）
A. Set the priority value of the Server2 Mail Exchanger (MX) record to 20. Create a new Mail Exchanger (MX) record for Server3. Set the priority value to 5.
B. Set the priority value of the Server2 Mail Exchanger (MX) record to 5. Create a new Mail Exchanger (MX) record for Server3. Set the priority value to 20.
C. Create a new Service Location (SRV) record in the domain for Server3. Set the port number value to 25. Configure the priority setting to 20.
D. Create a new Service Location (SRV) record in the domain for Server3. Set the port number value to 110. Configure the priority setting to 5.
Your company has a domain controller that runs Windows Server 2008 R2 and the DNS role. The DNS domain is named contoso.com. You need to ensure that inquiries about contoso.com are sent to dnsadmin@contoso.com.
What should you do？（）
A. Create a Signature (SIG) record for the domain controller.
B. Modify the Name Server (NS) record for the domain controller.
C. Modify the Service Location (SRV) record for the domain controller.
D. Modify the Start of Authority (SOA) record on the domain controller.
You are building a test environment to evaluate DNS Security Extensions (DNSSEC). You have a domain controller named Server1 that runs Windows Server 2008 R2 in your test environment. Server1 has the DNS Server server role installed. You need to configure Server1 to support the DNSSEC evaluation.
Which two actions should you perform？（）
A. Create a new Quad-A (AAAA) DNS record.
B. Create a new Signature (SIG) DNS record.
C. Create a new Public key (KEY) DNS record.
D. Create a new Well-known service (WKS) DNS record.
Your company has a server that runs Windows Server 2008 R2.You have a new application that locates remote resources by name. The new application requires IPv6.You need to ensure that the application can locate remote resources by using IPv6.
What should you do？（）
A.CreateanewPointer（PTR）DNSrecord.
B.CreateanewQuad-A（AAAA）DNSrecord.
C.CreateanewSignature（SIG）DNSrecord.
D.CreateanewRouteThrough（RT）DNSrecord.
Your company has a single Active Directory domain. All servers run Windows Server 2008 R2.You install an additional DNS server that runs Windows Server 2008 R2.You need to delete the pointer record for the IP address 10.3.2.127.
What should you do？（）
A. Use DNS manager to delete the 127.in-addr.arpa zone.
B. Run the dnscmd /RecordDelete 10.3.2.127 command at the command prompt.
C. Run the dnscmd /ZoneDelete 127.in-addr.arpa command at the command prompt.
D. Run the dnscmd /RecordDelete 10.in-addr.arpa. 127.2.3 PTR command at the command prompt.
Your company has a main office and two branch offices. Domain controllers in the main office host an Active Directory-integrated zone.The DNS servers in the branch offices host a secondary zone for the domain and use the main office DNS servers as the DNS Master servers for the zone. Each branch office has an application server. Users access the application server by using its fully qualified domain name. You need to ensure that users in the branch offices can access their local application server even if the WAN links are down for three days.
What should you do？（）
A. Increase the Expires After setting to 4 days on the Start of Authority (SOA) record for the zone.
B. Increase the Refresh Interval setting to 4 days on the Start of Authority (SOA) record for the zone.
C. Configure the Zone Aging / Scavenging Properties dialog box to enable Scavenge stale resource records, and set the Refresh setting to 4 days.
D. Configure the Zone Aging / Scavenging Properties dialog box to enable Scavenge stale resource records, and set the No-refresh interval setting to 4 days.
最新试题
Your network consists of a single Active Directory domain. All servers run Windows Server 2008 R2.You have a server named Server1 that hosts shared documents. Users report extremely slow response times when they try to open the shared documents on Server1.You log on to Server1 and observe real-time data indicating that the processor is operating at 100 percent of capacity.You need to gather additional data to diagnose the cause of the problem.What should you do?（）
Your company has a network that has 100 servers. A server named Server1 is configured as a file server. Server1 is connected to a SAN and has 15 logical drives. You want to automatically run a data archiving script if the free space on any of the logical drives is below 30 percent. You need to automate the script execution.You create a new Data Collector Set. What should you do next?（）
You perform a security audit on a server named Server1. You install the Microsoft Network Monitor 3.0 application on Server1. You find that only some of the captured frames display host mnemonic names in the Source column and the Destination column. All other frames display IP addresses. You need to display mnemonic host names instead of IP addresses for all the frames.What should you do?（）
You have 10 standalone servers that run Windows Server 2008 R2.You install the Windows Server Update Services (WSUS) server role on a server named Server1.You need to configure all of the servers to receive updates from Server1.What should you do？（）
Your company has a network that has an Active Directory domain. The domain has two servers named DC1 and DC2. You plan to collect events from DC2 and transfer them to DC1. You configure the required subscriptions by selecting the Normal option for the Event delivery optimization setting and by using the HTTP protocol.You discover that none of the subscriptions work.You need to ensure that the servers support the event collectors.Which three actions should you perform?（）
You have a server that runs Windows Server 2008. You need to configure the server as a VPN server. What should you installed on the server（）？
Your company has a server named DC1 that runs Windows Server 2008. DC1 has the DHCP server role installed. You find taht a desktop computer named SALES4 is unable to obtain an IP configuration from the DHCP server. You install the Microsoft Network Monitor 3.0 application on DC1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between DC1 and SALES4 The network interface configuration for the two computers is shown in the following table. （missing again wow）. You need to build a filter int he Network Monitor application to capture the DHCP traffic between DC1 and SALES4 Which filter should you use（）？
Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCPServer server role installed.You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server.You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1.The network interface configuration for the two computers is shown in the following table.Server1 Computer1IP address 192.168.2.1 169.254.15.84MAC address 00-0A-5E-1C-7F-67 00-17-31-D5-5E-FFYou need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1and Computer1.Which filter should you use？（）
Your company has deployed Network Access Protection （NAP). You configure secure wireless access to the network by using 802.1x authentication from any access point. You need to ensure that all client computers that access the network are evaluated by NAP. what should you do（）？
You have a server that runs Windows Server 2008 R2.You create a new quota template. You apply quotas to 100 folders by using the quota template.You need to modify the quota settings for all 100 folders. You must achieve this goal by using the minimum amount of administrative effort.What should you do?（）