Your company has an IPv4 Ethernet network.A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer named WKS1 requires access to servers on the Private1 network.
The WKS1 computer configuration is as shown in the following table.
Network Addresses
IPv4 Address 10.128.64.113
Subnet mask 255.255.252.0
Default Gateway 10.128.64.1
The routers are configured as shown in the following table.
Router ID Addresses
R1
interface 1
R1
interface 2 (To Internet)
10.128.64.1
131.107.108.37
R2
interface 1
R2
interface 2
10.128.64.10
10.128.4.1
WKS1 is unable to connect to the Private1 network by using the current configuration.You need to add a persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1？（）
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add p 10.128.4.0/26 10.128.64.10
C. Route add p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add p 10.128.64.10 mask 255.255.255.192 10.128.4.0
您可能感兴趣的试卷
你可能感兴趣的试题
Your network uses IPv4. You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with two network interfaces.You need to configure routing on the server at the branch office.
Which two actions should you perform？（）
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
You have a DHCP server that runs Windows Server 2008 R2. You restore the DHCP database by using a recent backup.You need to prevent DHCP clients from receiving IP addresses that are currently in use on the network.
What should you do？（）
A. Add the DHCP server option 15.
B. Add the DHCP server option 44.
C. Set the Conflict Detection value to 0.
D. Set the Conflict Detection value to 2.
You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network connections named LAN1 and LAN2.You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2.
What should you do？（）
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
You have a DHCP server that runs Windows Server 2008 R2.You need to reduce the size of the DHCP database.
What should you do？（）
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008 R2. The DHCP server contains one scope.You need to ensure that Server2 always receives the same IP address. Server2 must receive its DNS settings and its WINS settings from DHCP.
What should you do？（）
A. Create a multicast scope.
B. Assign a static IP address to Server2.
C. Create an exclusion range in the DHCP scope.
D. Create a DHCP reservation in the DHCP scope.
Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.
What should you do？（）
A. Create a new scope for the DNS servers.
B. Create a reservation for the DHCP server.
C. Configure the 005 Name Servers scope option.
D. Configure an exclusion that contains the IP addresses of the four DNS servers.
You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21.The server is configured to use IPv6 addressing.You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt？（）
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected by a firewall that performs symmetric NAT. You need to allow peer-to-peer communication between all locations.
What should you do？（）
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.You need to ensure that the portable computers can connect to network resources at the main office and the branch office.
How should you configure each portable computer？（）
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Your company is designing its network. The network will use an IPv6 prefix of 2001:DB8:BBCC:0000::/53.You need to identify an IPv6 addressing scheme that will support 2000 subnets.
Which network mask should you use？（）
A. /61
B. /62
C. /63
D. /64
最新试题
Your company has deployed Network Access Protection （NAP). You configure secure wireless access to the network by using 802.1x authentication from any access point. You need to ensure that all client computers that access the network are evaluated by NAP. what should you do（）？
You have a server that runs Windows Server 2008. you create a new quota template. you apply quotas to 100 folders by using the quota template. you nede to modify the quota settings for al 100 folders. You must achive this goal by using the minimum amount of administrative effort. What should you do（）？
Your company has users who connect remotely to the main office though a Windows Server 2008 VPN server. You need to ensure that users cannot access the VPN server remotely from 22：00 to 05：00. What should you do()？
You have 10 standalone servers that run Windows Server 2008 R2.You install the Windows Server Update Services (WSUS) server role on a server named Server1.You need to configure all of the servers to receive updates from Server1.What should you do？（）
Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.You need to reduce the number of events registered in the system log on Printer1. What should you do?（）
Your company has a network that has an Active Directory domain. The domain has two servers named DC1 and DC2. You plan to collect events from DC2 and transfer them to DC1. You configure the required subscriptions by selecting the Normal option for the Event delivery optimization setting and by using the HTTP protocol.You discover that none of the subscriptions work.You need to ensure that the servers support the event collectors.Which three actions should you perform?（）
Your company has a network that has 100 servers. A server named Server1 is configured as a file server. Server1 is connected to a SAN and has 15 logical drives. You want to automatically run a data archiving script if the free space on any of the logical drives is below 30 percent. You need to automate the script execution.You create a new Data Collector Set. What should you do next?（）
You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1.You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the E:\data.cap file. You create a scheduled task. You add a new Start a program action to the task.You need to add the application name and the application arguments to the new action.What should you do?（）
You install WSUS on a server that runs Windows Server 2008. You need to ensure that the traffic between the WSUS administrative web site and the server administrators computer is encrypted What should you do（）？
You have a file server that runs Windows Server 2008. A user restores a large file by using the Previous Versions tab. You need to view the progress of the file restoration what should you do（）？