Your network uses IPv4. You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with two network interfaces.You need to configure routing on the server at the branch office.
Which two actions should you perform？（）
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
您可能感兴趣的试卷
你可能感兴趣的试题
You have a DHCP server that runs Windows Server 2008 R2. You restore the DHCP database by using a recent backup.You need to prevent DHCP clients from receiving IP addresses that are currently in use on the network.
What should you do？（）
A. Add the DHCP server option 15.
B. Add the DHCP server option 44.
C. Set the Conflict Detection value to 0.
D. Set the Conflict Detection value to 2.
You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network connections named LAN1 and LAN2.You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server must continue to respond to non-DHCP client requests on LAN2.
What should you do？（）
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
You have a DHCP server that runs Windows Server 2008 R2.You need to reduce the size of the DHCP database.
What should you do？（）
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008 R2. The DHCP server contains one scope.You need to ensure that Server2 always receives the same IP address. Server2 must receive its DNS settings and its WINS settings from DHCP.
What should you do？（）
A. Create a multicast scope.
B. Assign a static IP address to Server2.
C. Create an exclusion range in the DHCP scope.
D. Create a DHCP reservation in the DHCP scope.
Your company has four DNS servers that run Windows Server 2008 R2. Each server has a static IP address. You need to prevent DHCP from assigning the addresses of the DNS servers to DHCP clients.
What should you do？（）
A. Create a new scope for the DNS servers.
B. Create a reservation for the DHCP server.
C. Configure the 005 Name Servers scope option.
D. Configure an exclusion that contains the IP addresses of the four DNS servers.
You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21.The server is configured to use IPv6 addressing.You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt？（）
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected by a firewall that performs symmetric NAT. You need to allow peer-to-peer communication between all locations.
What should you do？（）
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.You need to ensure that the portable computers can connect to network resources at the main office and the branch office.
How should you configure each portable computer？（）
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Your company is designing its network. The network will use an IPv6 prefix of 2001:DB8:BBCC:0000::/53.You need to identify an IPv6 addressing scheme that will support 2000 subnets.
Which network mask should you use？（）
A. /61
B. /62
C. /63
D. /64
Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do？（）
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
最新试题
You perform a security audit on a server named Server1. You install the Microsoft Network Monitor 3.0 application on Server1. You find that only some of the captured frames display host mnemonic names in the Source column and the Destination column. All other frames display IP addresses. You need to display mnemonic host names instead of IP addresses for all the frames.What should you do?（）
You perform a security audit of a server named CRM1. You want to build a list of all DNS requests that are initiated by the server. You install the Microsoft Network Monitor 3.0 application on CRM1. You capture all local traffic on CRM1 for 24 hours. You save the capture file as data.cap. You find that the size of the file is more than 1 GB. You need to create a file named DNSdata.cap from the existing capture file that contains only DNS-related data.What should you do? （）
Your company has a network that has an active directory domain. The domain has two servers named DC1 and DC2. You plan to collect events from DC2 and transfer them to DC1. You configure the required subscriptions by selecting the normal option for the event delivery optimiation setting and using the HTTP protocol. you discovere that none of the subscritpions work. You need to ensure that the servers support event collectiors. which three actions should you perform（）？
Your company has an Active Directory domain that has two domain controllers named DC1 and DC2.You prepare both servers to support event subscriptions. On DC1, you create a new default subscription for DC2. You need to review system events for DC2.Which event log should you select？（）
You have a file server that runs Windows Server 2008. A user restores a large file by using the Previous Versions tab. You need to view the progress of the file restoration what should you do（）？
You have a file server that runs Windows Server 2008. The server has a shared folder. You need to receive a notifcation when a user stores more than 500MB of data int he shared folder. You must allow users to store more than 500MB of data in the shared folder. What should you do（）？
Your company ahs an active direcotyr domain. The company also has a server named Server1 that runs Windows Server 2008. You install the file server role on Server1. you create a shared folder named AcctgShare on Server1 The permissions for the shared folder are configured as shown in the following table. （ missing again!） You need to ensure members of the Managers group can only view and open files in the shared folder. What should you do（）？
You have a file server that runs Windows Server 2008 R2.You configure quotas on the server.You need to view each user¯s quota usage on a per folder basisWhat should you do?（）
You manage a server that runs Windows Server 2008. The windows backup and restore utility is installed ont he server. You nede to create a full backup of all system state data to the DVD drive （R： drive） on the server. Which command should you run on the server（）？
Your companys corporate network uses Network Access Protection （NAP）. Users are able to connect to the corporate network remotely. You need to ensure that data transmissions between remote client computers and the corporate network are as secure as possible. What should you do（）？