A. Challenge Handshake Authentication Protocol (CHAP)
B. Extensible Authentication Protocol (EAP)
C. Microsoft Challenge Handshake Authentication Protocol version 2 (MS-CHAP v2)
D. Password Authentication Protocol (PAP)
您可能感兴趣的试卷
你可能感兴趣的试题
A.Create an Ipsec enforcement network policy.
B.Create an 802.1xenforcemen tnetwork policy.
C.Createa wired network(IEEE802.3)Group policy.
D.Create an extensible authentication protocol(EAP)enforcement network policy.
A.Run the netsh interfac eipv4 add dnsserve r“LAN”static 192.168.0.254index=1command.
B.Run the netsh interfac eipv4 set dnsserver“LAN”static 192.168.0.254192.168.0.1bothcommand.
C.Run the nets hinterfac eipv4 set dnsserver“LAN”static 192.168.0.254primary command and the netsh interface ipv4 set dnsserver “LAN” static 192.168.0.1both command.
D.Run the netsh interface ipv4 set dnssserver“LAN”static 192.168.0.254 primary command and the netsh interface ipv4 add dnssserver “LAN” static 192.168.0.1index=1command.
A.Add the event trace data collector
B.Add the performance counte ralert
C.Add the performance counte rdata collector
D.Add the system configuration datacollector.
A. Install the Network Policy Server (NPS) server role on RAS1.
B. Create a remote access policy that requires users to authenticate by using SPAP.
C. Create a remote access policy that requires users to authenticate by using EAP-TLS.
D. Create a remote access policy that requires users to authenticate by using MS-CHAP v2.
A. Configure an IPsec connection to use tunnel mode and preshared key authentication.
B. Configure a PPTP connection to use version 2 of the MS-CHAP v2 authentication.
C. Configure a L2TP/IPsec connection to use the EAP-TLS authentication.
D. Configure a L2TP/IPsec connection to use version 2 of the MS-CHAP v2 authentication.
A.Change the IP address to192.168.46.129
B.Change the IPaddress to192.168.46.200
C.Change thes ubnet mask to a 24-bitmask
D.Change the subnet mask to a 27-bitmask.
A. Restart the DNS Server service on DC1
B. Run the dnscmd command by using the /zonerefresh option on DC1
C. Run the dnscmd command by using the /zonerefresh option on SRV1
D. Set the refresh interval to 10minutes on the Start Of Authority (SOA) record.
A. Configure NAT1 to forward port 389 to RDP1.
B. Configure NAT1 to forward port 1432 to RDP1.
C. Configure NAT1 to forward port 3339 to RDP1.
D. Configure NAT1 to forward port 3389 to RDP1.
A.Run dnscmd using the ZoneResetMasters option
B.Run dnscmd by using the ZoneResetSecondaries option
C.Add the new DNS server to the Zone Transfers tab on one of the DNS servers in the main office
D.Add the new DNs server to the DNSUpdateProxy Global security group in Active Directory Users and Computers
A. Open port 1423 on the firewall.
B. Open port 1723 on the firewall.
C. Open port 3389 on the firewall.
D. Open port 6000 on the firewall.
最新试题
You perform a security audit of a server named CRM1. You want to build a list of all DNS requests that are initiated by the server. You install the Microsoft Network Monitor 3.0 application on CRM1. You capture all local traffic on CRM1 for 24hours. You save the capture file as data.cap. you find that the size of this file is more tahn 1GB. you need to create a file named DNSdata.cap from the existing capture file taht contains only dNS -related data What should you do()?
Your network consists of a single Active Directory domain. All servers run Windows Server 2008 R2.You have a server named Server1 that hosts shared documents. Users report extremely slow response times when they try to open the shared documents on Server1.You log on to Server1 and observe real-time data indicating that the processor is operating at 100 percent of capacity.You need to gather additional data to diagnose the cause of the problem.What should you do?()
You install WSUS on a server that runs Windows Server 2008. You need to ensure that the traffic between the WSUS administrative web site and the server administrators computer is encrypted What should you do()?
Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCPServer server role installed.You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server.You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1.The network interface configuration for the two computers is shown in the following table.Server1 Computer1IP address 192.168.2.1 169.254.15.84MAC address 00-0A-5E-1C-7F-67 00-17-31-D5-5E-FFYou need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1and Computer1.Which filter should you use?()
Your company has an Active Directory domain that has two domain controllers named DC1 and DC2.You prepare both servers to support event subscriptions. On DC1, you create a new default subscription for DC2. You need to review system events for DC2.Which event log should you select?()
Your company runs Windows Server Update Services (WSUS) on a server named Server1. Server1runs Windows Server 2008 R2. Server1 is located on the company intranet. You configure the WSUS Web site to use SSL.You need to configure a Group Policy object (GPO) to specify the intranet update locations.Which URLs should you use?()
You perform a security audit of a server named CRM1. You want to build a list of all DNS requests that are initiated by the server. You install the Microsoft Network Monitor 3.0 application on CRM1. You capture all local traffic on CRM1 for 24 hours. You save the capture file as data.cap. You find that the size of the file is more than 1 GB. You need to create a file named DNSdata.cap from the existing capture file that contains only DNS-related data.What should you do? ()
You have a server that runs Windows Server 2008. You need to configure the server as a VPN server. What should you installed on the server()?
You have 10 stand alone servers taht run Windows Server 2008. You install WSUS on a server named Server1. You need to configure all of the servers to receive updates from Server1 What should you do()?
You have 10 standalone servers that run Windows Server 2008 R2.You install the Windows Server Update Services (WSUS) server role on a server named Server1.You need to configure all of the servers to receive updates from Server1.What should you do?()