多项选择题Your network uses IPv4. You install a server that runs Windows Server 008 at a brach office. The server is configured with two network interfaces. You need to configure routing on the server at the branch office. Which two actions should you perform？（） 

A. Install the Routing and Remote Access role.
B. Run the netsh ras ip set access ALL command
C. Run the netsh interface ipv4 enable command
D. Enable the IPv4 Router Routing and Remote Access option

点击查看答案

您可能感兴趣的试卷

你可能感兴趣的试题

1.单项选择题Your company is designing its network. The network will use an IPv6 prefix of 2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000 subnets. Which network mask should you use？（）

A./61
B./62
C./63
D./64

点击查看答案
2.单项选择题Your company has a main office and a branch office. Users in the branch office report that they are unable o access shared resources in the main office. You discover that computers in the branch office have IP addresses in the range of 169.254.x.x you need to ensure that computers can connect to shared resources in both the main office and the branch office. What should you do？（）

A. Configure a DHCP relay agent on a member server in the main office
B. Configure a DHCP relay agent on a member server in the branch office
C. Configure the Broadcast Address DHCP server option to include the main offices DHCP server address
D. Configure the Resource Location Servers DHCP server option to include the main offices server ip addresses.

点击查看答案
3.单项选择题Your company has recently deployed a server that runs Windows Server 2008. The server has the IP information shown below. IP address 192.168.46.186 Subnet mask： 255.255.255.192 Default gateway： 192.168.46.1 Users on remote subnets report that they are unable to connect to the server. You need to ensure all users are able to connect to the server. What should you do？ （）

A. Change the IP address to 192.168.46.129
B. Change the IP address to 192.168.46.200
C. Change the subnet mask to a 24-bit mask
D. Change the subnet mask to a 27-bit mask.

点击查看答案
4.单项选择题Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network. You need to ensure that the server can communicate with all segments on the IPv6 network. What should you do？ （）

A. Configure the IPv6 address as fd00：：2b0：d0ff：fee9：4143/8
B. Configure the IPv6 address as fe80：：2b0：d0ff：fee9：4143/64
C. Configure the IPv6 address as ff80：：2b0：d0ff：fee9：4143/64
D. Configure the IPv6 address as 0000：：2b0：d0ff：fee9：4143/64

点击查看答案
5.单项选择题Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.You need to ensure that the server can communicate with all segments on the IPv6 network.What should you do？（）

A.Configure the IPv6 address as fd00：：2b0：d0ff：fee9：4143/8.
B.Configure the IPv6 address as fe80：：2b0：d0ff：fee9：4143/64.
C.Configure the IPv6 address as ff80：：2b0：d0ff：fee9：4143/64.
D.Configure the IPv6 address as 0000：：2b0：d0ff：fee9：4143/64.

点击查看答案
6.单项选择题

Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22. The network must be configured as shown in the following exhibit.You need to configure subnets for each segment.Which network addresses should you assign？（）

A.SegmentA：131.107.40.0/23  SegmentB：131.107.42.0/24  SegmentC：131.107.43.0/25  SegmentD：131.107.43.128/27
B.SegmentA：131.107.40.0/25  SegmentB：131.107.40.128/26  SegmentC：131.107.43.192/27  SegmentD：131.107.43.224/30
C.SegmentA：131.107.40.0/23  SegmentB：131.107.41.0/24  SegmentC：131.107.41.128/25  SegmentD：131.107.43.0/27
D.SegmentA：131.107.40.128/23  SegmentB：131.107.43.0/24  SegmentC：131.107.44.0/25  SegmentD：131.107.44.128/27

点击查看答案
7.单项选择题Your company has a single Active Directory domain. All servers run Windows Server 2008. you install an additional DNS server that runs Windows Server 2008. You need to delete the pointer record for the IP address 10.3.2.127. What should you do？（） 

A. Use DNS manager to delete the 127.in-addr.arpa zone.
B. Run the dnscmd /RecordDelete 10.3.2.127 command at the command prompty
C. Run the dnscmd /ZoneDelete 127.in-addr.arpa command at the command prompt.
D. Run the dnscmd /RecordDelete 10.in-addr.arpa 127.2.3 PTR command at the command prompt.

点击查看答案
8.单项选择题Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects the main office to a branch office. All computers in the branch office are configured with static IP addresses. The branch office does not use DHCP and uses a different subnet.  You need to ensure that the portable computers can connect to network resources at the main office and the branch office.How should you configure each portable computer（）？

A.Use a static IPv4 address in the range used at the branch office.
B.Use an alternate configuration that contains a static IP address in the range used at the main office.
C.Use the address that was assigned by the DHCP server as a static IP address.
D.Use an alternate configuration that contains a static IP address in the range used at the branch office.

点击查看答案
9.单项选择题Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Routing and Remote Access service （RRAS） role service installed.You need to view all inbound VPN packets. The solution must minimize the amount of data collected.What should you do？（）

A.From RRAS，create an inbound packet filter.
B.From Network Monitor，create a capture filter.
C.From the Registry Editor，configure file tracing for RRAS.
D.At the command prompt，run netsh.exe ras set tracing rasauth enabled.

点击查看答案
10.单项选择题Your company has a single Active Directory forest that has an Active Directory domain named na.contoso. com A member server named Server2 runs the DNS server role. The Server2 DNS service hosts multiple secondary zones including na.contoso.com. You need to reconfigure Server2 as a caching-only DNS server. What should you do（）

A. Uninstall and reinstall the DNS service on Server2
B. Change all the DNS zones on Server2 to stub zones
C. Disable and then enable the DNS service on Server2
D. Delete the na.contoso.com DNS zone domain from Server2. Restart the DNS service on Server2.

点击查看答案

最新试题

Your company has a network that has 100 servers. You install a new server that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed. After a week, you discover that the Reliability Monitor has no data, and that the Systems Stability chart has never been updated.You need to configure the server to collect the Reliability Monitor data.What should you do？（）

题型：单项选择题

You have a file server that runs Windows Server 2008. A user restores a large file by using the Previous Versions tab. You need to view the progress of the file restoration what should you do（）？  

题型：单项选择题

Your network consists of a single Active Directory domain. All servers run Windows Server 2008 R2.You have a server named Server1 that hosts shared documents. Users report extremely slow response times when they try to open the shared documents on Server1.You log on to Server1 and observe real-time data indicating that the processor is operating at 100 percent of capacity.You need to gather additional data to diagnose the cause of the problem.What should you do?（）

题型：单项选择题

You have a server that runs Windows Server 2008. You need to configure the server as a VPN server. What should you installed on the server（）？  

题型：单项选择题

Your company has a server named Printer1 that runs Windows Server 2008 R2. Printer1 has the Print and Document Services server role installed.You need to reduce the number of events registered in the system log on Printer1. What should you do?（）

题型：单项选择题

Your company has a main office and one branch office. The main office has a print server named Printer1. The branch office has a print server named Printer2. Printer1 manages 15 printers and Printer2 manages seven printers. You add Printer2 to the Print Management console on Printer1. You need to send an automatic notification when a printer is not available. What should you do?（）

题型：单项选择题

Your company has an active directory domain that has two domain controllers named DC1 and DC2. You prepare both servers to support event subscriptions. On DC1， you create a new default subscription for DC2. You need to review system events for DC2. Which event log should you select（）？ 

题型：单项选择题

Your company has a network that has 100 servers. You install a new server that runs Windows Server 2008. The server has the Web Server （IIS） role installed. You discover that the Reliability Monitor has no data， and that the system stablitiy chare has never been updated. You nede to configure the server to collect the reliability monitor data. What should you do（）？  

题型：单项选择题

Your company has a network that has an Active Directory domain. The domain has two servers named DC1 and DC2. You plan to collect events from DC2 and transfer them to DC1. You configure the required subscriptions by selecting the Normal option for the Event delivery optimization setting and by using the HTTP protocol.You discover that none of the subscriptions work.You need to ensure that the servers support the event collectors.Which three actions should you perform?（）

题型：多项选择题

You deploy Windows Server 2008 VPN server behind a firewall. Remote users connect to the VPN by using portable computers that run Windows Vista with the latest service pack. The firewall is configured to allow only secured web communications. You need to enable remote users to connect as securely as possible. you must achieve this goal without opening any additional ports on the firewall. What should you do ()？  

题型：单项选择题