A.VTP allows routing between VLANs.
B.VTP allows a single port to carry information to more than one VLAN.
C.VTP allows physically redundant links while preventing switching loops.
D.VTP allows switches to share VLAN configuration information.
您可能感兴趣的试卷
你可能感兴趣的试题
A.FTP
B.Telnet
C.SMTP
D.DNS
E.HTTP
F.POP3
A.NAT protects network security because privat enetworks are not advertised.
B.NAT accelerates the routing process because no modifications are made on the packets.
C.Dynamic NAT facilitates connections from the outside of the network.
D.NAT facilitates end-to-end communication when IPsec is enable.
E.NAT eliminates the need to re-address all host that require extemal access.
F.NAT conserves addresses through host MAC-level multiplexing.
A.to map all the devices on a network.
B.to display the current TCP/IP configuration values.
C.to see how a device MAC address is mapped to its IP address.
D.to see the path a packet will take when traveling to a specified destination.
E.to display the MTU values for each router in a specified network path from source to a destination.
A.point-to-point and multiaccess
B.point-to-multipoint and multiaccess
C.point-to-point and point-to-multipoint
D.nonbroadcast and broadcast multipoint
E.nonbroadcast and broadcast multiaccess
A.denial of service
B.brute force
C.reconnaissance
D.Trojan horse
A.access-list 50 deny 192.168.1.10.0.0.255
B.access-list 110 permit ip any any
C.access-list 2500 deny tcp any host 192.168.1.1 eq22
D.access-list 101 deny tcp any host 192.168.1.1
A.15 seconds
B.30 seconds
C.180 seconds
D.240 seconds
A.It provides dynamic neighbor discovery.
B.It detects unreachable neighbors in 90 second intervals.
C.It maintains neighbor relationships.
D.It negotiates correctness parameters between neighboring interfaces.
E.Ituses timers to elect the router with the fastest links as the designated router.
F.It broadcasts hello packets throughout the internetwork to discover all routers that are running OSPF.
A.hub
B.router
C.switch
D.STP
E.subinterfaces
F.VLAN
A.The PC has connectivity with a local host.
B.The PC has connectivity with a Layer 3 device.
C.The PC has a default gateway correctly configured
D.The PC has connectivity up to Layer 5 of the OSI model
E.The PC has the TCP/IP protocol stack correctly installed.
最新试题
请参见图示。RouterB 已经过正确配置。RouterA 的以太网接口Fa0/0已使用如图所示的命令进行配置。但是,从RouterA 的Fa0/0接口无法成功ping 通RouterB 的Fa0/0接口。应在RouterA 上采取什么措施来解决此问题?()
在Cisco IOS 设备中,启动配置文件存储于何处?()
请参见图示。某用户想要查看当前的配置。图中所示为ipconfig/all 命令的输出。从此输出可以得到哪三项结论?()
PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机。以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常?()
在路由器上使用Router#copy running-config startup-config 命令会产生什么效果?()
何时必须使用clock rate 命令配置路由器串行接口?()
请参见图示。一台主机正使用NAT 连接到Internet。下列哪三项IP 地址可实现此连接?()
传输层如何让主机能同时针对不同应用程序维护多个通信流?()
请参见图示。电缆1和电缆2分别按照特定的物理层要求接线。哪三个网段使用电缆2?()
OSI 哪一层可提供有序的数据重构服务?()