A.在信道上传输原始的比特流
B.加强物理层数据传输原始比特流的功能并且进行流量调控
C.确定数据包从源端到目的端如何选择路由
D.确保到达对方的各段信息正确无误
您可能感兴趣的试卷
你可能感兴趣的试题
A.Dead
B.Establish
C.Network
D.Terminate
A.Organization for Standards Institute
B.Organization for Internet Standards
C.Open Standards Institute
D.Open Systems Interconnection
A.to map a known DLCI to an IP address
B.to mapa known IP address to a MAC address
C.to map known SPID toa MAC address
D.to map a known DLCI to a MAC address
E.to map a known IP address to a SPID
F.to mapa known MAC address to an IP address
A.16
B.32
C.4095
D.4096
A.10.10.0.0/18 subnetted with mask 255.255.255.252
B.10.10.0.0/25 subnetted with mask 255.255.255.252
C.10.10.0.0/24 subnetted with mask 255.255.255.252
D.10.10.0.0/23 subnetted with mask 255.255.255.252
E.10.10.0.0/16 subnetted with mask 255.255.255.252
A.映射本地IP到对端端口值,以便路由器发送数据时确认发送端口
B.映射本地IP到本地端口值,以便路由器发送数据时确认发送端口
C.映射对端IP到本地端口值,以便X.25交换网络查找数据发送路径
D.映射对端IP到对端端口值,以便X.25交换网络查找数据发送路径
A.150.150.0.0
B.150.150.0.8
C.150.150.8.0
D.150.150.16.0
A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30
The switches shown in the diagram, Core and Core2, are both Catalyst 2950s. The addressing scheme for each company site is as follows:Router Ethernet port - 1st usable addressCore - 2nd usable addressCore2 - 3rd usable addressFor this network, which of the following commands must be configured on Core2 to allow it to be managed remotely from any subnet on the network? ()
A.Core2(config)# interface f0/0 Core2(config-if)# ip address 192.168.1.10 255.255.255.248
B.Core2(config)# interface vlan 1 Core2(config-if)# ip address 192.168.1.11 255.255.255.248
C.Core2(config)# line con 0 Core2(config-line)# password cisco
D.Core2(config)# line vty 0 4 Core2(config-line)# password cisco
E.Core2(config)# ip default-gateway 192.168.1.9
F.Core2(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.8
最新试题
要将数据包发送到远程网络,应使用哪种设备?()
请参见图示。主机A 正在访问多台服务器。结合使用什么端口号和地址即可唯一识别特定服务器上运行的特定进程?()
请参见图示。主机B 尝试与主机C 建立TCP/IP 会话。在尝试期间,San Francisco 器由器的FastEthernet 接口fa0/1捕获到一个帧。捕获的帧中包含源IP 地址为10.10.1.2而目的IP 地址为10.31.1.20的数据包。捕获该帧时,它的目的MAC 地址是什么?()
请参见图示。图中所示路由表所属的PC 已正确配置。IP 地址192.168.1.254属于哪一个网络设备或接口?()
请参见图示。网络中的所有设备均使用默认配置。此拓扑中需要多少个逻辑地址范围?()
请参见图示。主机X 和主机Y 与本地网络的通信受到限制。此问题的原因是什么?()
请参见图示。已启用路由器的NAT 功能供PC 访问Internet。可以为路由器接口S0/0/0分配下列哪一个IP 地址?()
请参见图示。一台主机正使用NAT 连接到Internet。下列哪三项IP 地址可实现此连接?()
以下哪两种介质可提供高达1Gb/s 的带宽?()
OSI 模型的哪两项功能在第2层实现?()