A.fuel valve
B.the starting air valve
C.the sea chest
D.the main sea pump inlet valve
您可能感兴趣的试卷
你可能感兴趣的试题
A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
A.achromatism or thin gray
B.thin white
C.sky-blue
D.black
A.notify the duty officer, reduce the engine speed, take some measures to remove failures
B.notify the duty officer and stop the engine immediately, find the cause and remove failures
C.notify the C/E
D.notify the captain
A.2
B.3
C.4
D.5
A.open the indicator cocks
B.supply some LO to cylinder liner wall with lubricator
C.put the fuel handle in the "stop" position
D.pump up the air bottle
A.cooling water of the cooling system
B.fuel of the FO system
C.LO of the LO system
D.cooling water of the cooling system and LO of the LO system
A.to reduce heat stress
B.to reduce low temperature corrosion
C.to improve firing and starting performance
D.fuel saving
最新试题
The treatment of the fuel oils involves storage, heating, filtering and()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
To proceed to the assistance of a ship in distress is()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
The main purpose of port State control is not to()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The ISPS Code consists of a mandatory section-Part A, which shows()