A.shut off the starting air receiver outlet valve
B.stop the FO priming transfer pump and shut off the correspondence inlet and outlet valve
C.stop the SW pump immediately and shut off the correspondence inlet and outlet valve
D.stop the FW pump immediately and shut off the correspondence inlet and outlet valve
您可能感兴趣的试卷
你可能感兴趣的试题
A.overload
B.the odds of the load
C.the default of parts
D.overload and the odds of the load
A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
A.achromatism or thin gray
B.thin white
C.sky-blue
D.black
A.notify the duty officer, reduce the engine speed, take some measures to remove failures
B.notify the duty officer and stop the engine immediately, find the cause and remove failures
C.notify the C/E
D.notify the captain
A.2
B.3
C.4
D.5
A.open the indicator cocks
B.supply some LO to cylinder liner wall with lubricator
C.put the fuel handle in the "stop" position
D.pump up the air bottle
A.cooling water of the cooling system
B.fuel of the FO system
C.LO of the LO system
D.cooling water of the cooling system and LO of the LO system
A.to reduce heat stress
B.to reduce low temperature corrosion
C.to improve firing and starting performance
D.fuel saving
A.to inspect if the cylinder has the water leakage
B.to expel out the residual water/gas/oil from the cylinder
C.to check if fuel supply is normal
D.A and B
最新试题
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Diesel engine air start system check valves are opened by ()
Refrigerant entering the compressor of a refrigeration system should be in which of the following conditions?()
Using a file without a handle may result in ()
The ISPS Code consists of a mandatory section-Part A, which shows()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The treatment of the fuel oils involves storage, heating, filtering and()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.