A.testing for the mechanical load and the thermal load
B.inspecting thermal and mechanical condition of the engine
C.inspecting each system and exhaust temperature
D.testing for compress pressure and explosion pressure
您可能感兴趣的试卷
你可能感兴趣的试题
A.the highest
B.above 3/4
C.1/2-3/4
D.the lowest
A.achromatism or thin gray
B.thin white
C.sky-blue
D.black
A.notify the duty officer, reduce the engine speed, take some measures to remove failures
B.notify the duty officer and stop the engine immediately, find the cause and remove failures
C.notify the C/E
D.notify the captain
A.2
B.3
C.4
D.5
A.open the indicator cocks
B.supply some LO to cylinder liner wall with lubricator
C.put the fuel handle in the "stop" position
D.pump up the air bottle
A.cooling water of the cooling system
B.fuel of the FO system
C.LO of the LO system
D.cooling water of the cooling system and LO of the LO system
A.to reduce heat stress
B.to reduce low temperature corrosion
C.to improve firing and starting performance
D.fuel saving
A.to inspect if the cylinder has the water leakage
B.to expel out the residual water/gas/oil from the cylinder
C.to check if fuel supply is normal
D.A and B
A.the main engine in the stand-by condition
B.auxiliary machinery in the stand-by condition
C.dynamical equipments in the stand-by condition and could be used immediately
D.A and B
A.engine trails should be done after finishing the operation of turning the engine with the turning gear and starting the engine on air briefly
B.in the operation of engine trails, the main engine should be running in low-speed
C.As to the ship equipment with twin main engine, engine trials should be done with one engine ahead and another engine astern at the same time
D.the order “engine trials” should be given by the bridge
最新试题
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
Engine parameters shall be corresponded to NOx Technical Files. This is required by ()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
To proceed to the assistance of a ship in distress is()
The shipboard oil pollution emergency plan will be invalid after ()
The main purpose of port State control is not to()
()connectors hold best if a wire is accidentally pulled or a connection becomes loose.
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()