A.Overflow valve
B.Reducing valve
C.Balancing valve
D.Reducing valve or balancing valve
您可能感兴趣的试卷
你可能感兴趣的试题
A.overflow valve
B.reducing valve
C.relief valve
D.sequence valve
A.overflow valve
B.reducing valve
C.relief valve
D.sequence valve
A.control the fluid flow through it
B.prevent the pressure before it over the specified valve
C.make the pressure after it steady
D.control the direction of oil flow
A.control the back pressure of return oil
B.lock the oil lines under some conditions
C.change the direction of oil flow
D.act as relief valve
A.direction of oil flow
B.back pressure of return oil
C.bypass of filter
D.high pressure overflow
A.Too much sludge accumulated in separator bowl
B.Diameter of gravity disc too large
C.High level tank lack of water
D.Oil input too rapidly
A.Oil temperature too high
B.Diameter of gravity disc too large
C.Oil temperature too low
D.High level tank out of water
A.Oil inlet valve opening too quickly
B.Oil temperature too high
C.Diameter of gravity disc too small
D.Viscosity of oil too low
A.cut off the power
B.cut off the oil inlet
C.open guide water valve
D.close oil outlet value
A.acid
B.sludge
C.mechanical impurity
D.salinity
最新试题
When does auxiliary burner of incinerator put into operation? （）Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the（）
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a（）
If separating effect is not good, which measure should be taken （）
Which of the listed governor characteristics will greatly affect the load sharing relationship between paralleled diesel generators?（）
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated（）
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is（）
The treatment of the fuel oils involves storage, heating, filtering and（）
To proceed to the assistance of a ship in distress is（）
The additional mark （）in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.