A.too little seal water
B.improper gravity disc
C.oil discharging pump not working very well
D.low water level of the working water
您可能感兴趣的试卷
你可能感兴趣的试题
A.100%
B.80%
C.1/2
D.1/3
A.100%
B.1/2
C.1/5
D.1/3
A.seal water supply be cut off
B.make up water supply be cut off
C.oil outlet valve closed or not open sufficiently
D.the flow rate of oily water is too much
A.both as clarifiers
B.first one as clarifiers, second one as purifier
C.both as purifiers
D.first one as purifier, second one as clarifier
A.the plant should be prohibited to supplying air
B.the plant should work at intervals
C.the plant should be added disinfector in time
D.we should check strength of activated sludge, ivory-white color is best
A.chlorine water
B.ozone
C.hypo-calcium chloride
D.calcium oxide
A.deposition chamber
B.oxidation pool
C.disinfection chamber
D.all chamber
When does auxiliary burner of rotary nozzle incinerator begin to work? ()
Ⅰ.hen igniting
Ⅱ.he sludge for dealing with is too much
Ⅲ.efore stopping incinerator
A.Ⅰ+Ⅱ
B.Ⅰ+Ⅲ
C.Ⅱ+Ⅲ
D.Ⅰ+Ⅱ+Ⅲ
A.After stopping supplying sludge oil, the value and pipe should be flushed by flushed by diesel oil and the incinerator continue burning for 10 minutes
B.Close auxiliary burner firstly and then close main burner
C.After stopping fuel, restoring the position of main fuel supply valve
D.Stop blower as soon as stopping supplying fuel oil
A.Scavenging time should be more 30 seconds before igniting
B.The temperature of sludge tank is 80~100℃
C.First igniting the incinerator with diesel oil, when the temperature of health is about 600℃, the sludge oil drawn in
D.The ash can be dumped into sea when the distance is more than 3 miles from land
最新试题
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
The treatment of the fuel oils involves storage, heating, filtering and()
Which of the following items don’t belong to dock repair works?()
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The condensers located in various stages of a flash evaporator are cooled by()
The ISPS Code consists of a mandatory section-Part A, which shows()
The main purpose of port State control is not to()
Using a file without a handle may result in ()