A.100%
B.1/2
C.1/5
D.1/3
您可能感兴趣的试卷
你可能感兴趣的试题
A.seal water supply be cut off
B.make up water supply be cut off
C.oil outlet valve closed or not open sufficiently
D.the flow rate of oily water is too much
A.both as clarifiers
B.first one as clarifiers, second one as purifier
C.both as purifiers
D.first one as purifier, second one as clarifier
A.the plant should be prohibited to supplying air
B.the plant should work at intervals
C.the plant should be added disinfector in time
D.we should check strength of activated sludge, ivory-white color is best
A.chlorine water
B.ozone
C.hypo-calcium chloride
D.calcium oxide
A.deposition chamber
B.oxidation pool
C.disinfection chamber
D.all chamber
When does auxiliary burner of rotary nozzle incinerator begin to work? ()
Ⅰ.hen igniting
Ⅱ.he sludge for dealing with is too much
Ⅲ.efore stopping incinerator
A.Ⅰ+Ⅱ
B.Ⅰ+Ⅲ
C.Ⅱ+Ⅲ
D.Ⅰ+Ⅱ+Ⅲ
A.After stopping supplying sludge oil, the value and pipe should be flushed by flushed by diesel oil and the incinerator continue burning for 10 minutes
B.Close auxiliary burner firstly and then close main burner
C.After stopping fuel, restoring the position of main fuel supply valve
D.Stop blower as soon as stopping supplying fuel oil
A.Scavenging time should be more 30 seconds before igniting
B.The temperature of sludge tank is 80~100℃
C.First igniting the incinerator with diesel oil, when the temperature of health is about 600℃, the sludge oil drawn in
D.The ash can be dumped into sea when the distance is more than 3 miles from land
When does auxiliary burner of incinerator put into operation? ()
Ⅰ.tart incinerator when it is cold
Ⅱ.he sludge for dealing with is little
Ⅲ.he sludge for dealing with is large
Ⅳ.he water and impurity in sludge are too much
Ⅴ.he temperature in incinerator is low
Ⅵ.ealing with little solid rubbish
A.Ⅰ+Ⅱ+Ⅲ+Ⅴ
B.Ⅰ+Ⅱ+Ⅲ+Ⅳ
C.Ⅰ+Ⅳ+Ⅴ+Ⅵ
D.Ⅰ+Ⅱ+Ⅲ+Ⅵ
A.filled with clean water before operation
B.keep air cushion in oil collecting space during running
C.check oil level during running
D.clean inner separator with low pressure stream
最新试题
During the diesel engine running, the water level of F.W expansion tank should normally kept in the () level of glass tube.
The ISPS Code consists of a mandatory section-Part A, which shows()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
() is not installed on the main switchboar.
Under MARPOL Code the ship to which it applies has to carry ()
For a given exhaust gas boiler, what is the quantity of its evaporation mainly determined?()
Using a file without a handle may result in ()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()