A.rapid reduction of ship’s friction force
B.shaft system over mechanical load
C.sharp growth of the torque of diesel engine
D.propeller torque change along J=0 curve
您可能感兴趣的试卷
你可能感兴趣的试题
A.reduce the fuel feeding of main engine of inner propeller
B.reduce the fuel feeding of main engine of outer propeller
C.firstly reduce the fuel of main engine of inner propeller, then reduce the fuel feeding of engine of outer propeller
D.reduce fuel feeding of two engines at the same time
A.stop main engine immediately
B.ask the captain and the chief engineer’s permission for stopping the engine
C.initiatively inquire the bridge for the situation
D.stop engine and inform bridge
A.10%
B.15%
C.20%
D.5%
A.cleaning fuel oil, lubricating oil and seawater filter
B.reducing fuel feeding of the main engine appropriately or reducing the pitch angle of propeller
C.using low sea chest
D.closing the skylight and the ventilation opening, which doesn’t affect the normal work of equipments
A.navigating with a low diesel engine speed
B.navigating with a stable diesel engine speed
C.increasing the efficiency of propeller
D.increasing fuel injection
A.prevent the diesel engine surging
B.prevent governor from being damaged because of swing
C.reduce the probability of the crank shaft being torsional vibrated and resonated
D.prevent the main engine being overload or overspeed
A.the power of main engine will be reduced
B.exhaust temperature will be increased
C.the speed of the ship will be reduced
D.the propulsion characteristic of propeller will keep unchanged
A.reduce fuel feeding
B.increase fuel feeding
C.keep original fuel feeding
D.be overspeed
A.overspeed;overload
B.overload;overspeed
C.over torque;overspeed
D.low mechanical efficiency;overload
A.power of main engine
B.turbine rotation speed
C.speed of main engine
D.exhaust temperature
最新试题
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
Cold weather starting of a diesel engine may be made easier by()
The cetane rating of diesel fuel is an indication of the ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
() is not installed on the main switchboar.
If two A.C.generators are to be operated in parallel, the load is distributed evenly by()
Flame failure in an automatically fired auxiliary boiler can from a/an ()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
A purge recovery system is used in a centrifugal air conditioning or refrigeration system to ()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()