A.reduce fuel feeding
B.increase fuel feeding
C.keep original fuel feeding
D.be overspeed
您可能感兴趣的试卷
你可能感兴趣的试题
A.overspeed;overload
B.overload;overspeed
C.over torque;overspeed
D.low mechanical efficiency;overload
A.power of main engine
B.turbine rotation speed
C.speed of main engine
D.exhaust temperature
A.Ⅰ + Ⅱ
B.Ⅰ ~ Ⅲ
C.Ⅰ ~ Ⅳ
D.Ⅰ + Ⅱ + Ⅳ
A.overspeed;overload
B.overload;overspeed
C.over mechanical load;over thermal load
D.over torque;overspeed
A.to work as overload characteristic
B.overspeed
C.over mechanical load only
D.over thermal load only
A.Class A
B.Class B
C.Class C
D.Class D
A.being given
B.giving
C.supplying
D.being supplied
A.MARPOL Annex Ⅲ
B.MARPOL Annex Ⅵ
C.MARPOL Annex Ⅴ
D.MARPOL Annex Ⅳ
A.the International Convention for the Safety of the Life at Sea
B.the International Convention for the Prevention from ships
C.the International Convention on control of harmful anti-fouling system on ships
D.the International Convention for the Control and Management of Ship’s Ballast Water and Sediments
A.Revised MARPOL Annex Ⅰ
B.Revised MARPOL Annex Ⅱ
C.International convention for the control and management of ships ballast water and sediments
D.ISPS Code
最新试题
If separating effect is not good, which measure should be taken ()
The condensers located in various stages of a flash evaporator are cooled by()
The ISPS Code consists of a mandatory section-Part A, which shows()
Under MARPOL Code the ship to which it applies has to carry ()
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
Using a file without a handle may result in ()
When does auxiliary burner of incinerator put into operation? ()Ⅰ. start incinerator when it is coldⅡ. the sludge for dealing with is littleⅢ. the sludge for dealing with is largeⅣ. the water and impurity in sludge are too muchⅤ. the temperature in incinerator is lowⅥ. dealing with little solid rubbish
Cold weather starting of a diesel engine may be made easier by()
()are used to digest the sewage to produce innocuous sludge in a biological sewage treatment plant.
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()