单项选择题Before charging a refrigeration unit, the refrigerant charging lines should be()

A.flushed with clean refrigerant oil
B.purged with the refrigerant
C.washed with an ammonia and alcohol solution
D.grounded to compressor


您可能感兴趣的试卷

你可能感兴趣的试题

1.单项选择题In the presence of an open flame or hot surfaces, chlorinated fluorocarbon refrigerants decomposes and from ()

A.petroleum crystals
B.phosgene gas
C.water vapor
D.carbon monoxide

2.单项选择题In an operating refrigeration system low on refrigerant, a liquid line sight glass will()

A.be clear
B.be blue
C.be light green
D.show bubbles

3.单项选择题The thermal expansion valve reacts directly to the ()

A.temperature in the space being cooled
B.liquid refrigerant pressure at the solenoid valve
C.pressure drop across the evaporator coils
D.refrigerant gas superheat at the coil outlet

4.单项选择题When transmitted by a reduction gear, diesel engine speed is reduced and the torque available for work ()

A.remains the same
B.is reduced
C.is increased
D.is eliminated

5.单项选择题Pitting in the area close to the pitch line and on the same end of each gear tooth of a reduction gear unit would be caused by ()

A.corrosion on the gears
B.excessive gear speed
C.dirt in the oil
D.misalignment of the gears

6.单项选择题When used with reversing reduction gears, medium-speed diesel engines should be bolted to their foundations with fitted bolts at the drive end and clearance(loosely fitted) bolts in other locations √This is done to ()

A.maintain alignment when the ship’s hull is working in heavy seas
B.ensure engine vibrations correspond to the natural frequency of the hull
C.permit the engine to expand away from the driven equipment as the engine heats up and expands
D.maintain engine thrust bearing clearances

7.单项选择题Some medium and high-speed diesel engines require reduction gear units to provide a useful propeller speedIn most reduction gears, the bull gear()

A.must churn the oil in the sump
B.is connected to the propeller shaft
C.is driven at the highest RPM
D.compensates for alignment variations between the engine and pinion gear

9.单项选择题Which of the following procedures should be carried out when a large, low-speed, diesel engine is operated with one cylinder secured?()

A.Lubrication to the defective cylinder should be increased
B.Cooling water temperature to the engine should be increased
C.Only the turbocharger speed should be reduced
D.Engine speed should be reduced

10.单项选择题A diesel engine could fail to start because of ()

A.incorrect injection timing
B.low exhaust back pressure
C.floating exhaust valves
D.excessive cranking speed