A.later and close sooner
B.sooner and close later
C.sooner and close sooner
D.later and close later
您可能感兴趣的试卷
你可能感兴趣的试题
A.pyrostats and a voltmeter
B.a gas-filled bellows, a tube and a pressure gauge
C.thermocouples and a voltmeter
D.ammeters and thermocouples
A.clogged coolant passages
B.a leaking cylinder head gasket
C.low fuel oil pressure
D.worn or broken cylinder liner sealing rings
A.before TDC and close after BDC
B.after TDC and close after BDC
C.before TDC and close before BDC
D.after TDC and close before BDC
A.an air start cam
B.cylinder compression pressure
C.starting air pressure
D.valve springs
A.chemical analysis
B.back pressure readings
C.pyrometer readings
D.infrared analysis
A.insufficient fuel supply due to fuel pump valves sticking or leaking
B.excessive mechanical clearance between the piston crown and cylinder head
C.excessively worn fuel pump plunger
D.excessive exhaust back pressure
A.detecting faulty combustion in individual cylinders
B.adjusting fuel racks to maintain equal loading between cylinders
C.adjusting the load limit setting of the governor at idle conditions
D.calculating engine horsepower
A.tension load twice each crankshaft revolution
B.compression load during power and compression strokes
C.inertia load once every four crankshaft revolutions
D.bending loads at bottom and top dead center
A.cooling water leaving each cylinder
B.fuel oil entering the injector
C.exhaust gases at various locations
D.lube oil at the bearing supplies
A.low water in the expansion tank
B.improperly seated valves
C.low fuel oil pressure
D.worn or broken cylinder liner sealing rings
最新试题
() is not installed on the main switchboar.
Which of the following items don’t belong to dock repair works?()
“Insufficiency of manning or insufficiency of certification of seafarers” is an identification of a()
One of the reasons that cause oil flowed from sludge outlet of a self-cleaning separator is()
The additional mark ()in the Classification Certificate for Machinery means propulsion apparatus is remotely controlled on the navigating bridge control station, and engine assembly control station is unmanned periodically.
The cetane rating of diesel fuel is an indication of the ()
To shut down a diesel engine after it exceeds the set maximum speed,which type of device listed should be used?()
The ISPS Code consists of a mandatory section-Part A, which shows()
Thermostatic steam pressure reducing valves are used in the fuel oil service system to control the()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()