A.ignition quality of the fuel
B.calorific value of the fuel
C.flash point of the fuel
D.rate of fuel consumption
您可能感兴趣的试卷
你可能感兴趣的试题
A.Viscosity
B.acid content
C.heating value
D.ignition quality
A.Viscosity
B.Sulfur content
C.Pour point
D.Cetane number
A.Exhaust energy would draw excess air
B.The inertia of the turbocharger rotor causes a time lag which delays the turbocharger speed increase
C.Exhaust gas pumping losses are increased due to turbine windage
D.Exhaust gas back pressure falls slightly due to increased nozzle action
A.use of low viscosity oil in cold weather
B.increased moisture content of inlet air in cold weather
C.increased drag of pistons and bearings due to increased oil viscosity
D.higher compression pressures reached due to smaller clearances existing in the engine during cold weather
A.octane number
B.cetane number
C.viscosity in Saybolt seconds
D.air fuel ratio
A.Decreasing scavenge air pressure
B.Increasing exhaust temperatures before the turbine
C.Reduction in engine speed
D.All of the above
A.quality of air filtration
B.effectiveness of lubrication
C.type of fuel used
D.all of the above
A.cetane number
B.octane number
C.ignition index number
D.volatility point
A.antiknock characteristics
B.ignition qualities
C.rates of vaporization
D.viscosity
A.increase in starting air pressure
B.increase in lube oil viscosity
C.compression expansion device
D.jacket water heater
最新试题
Which of the following items don’t belong to dock repair works?()
Which one is NOT the ‘clear grounds’ for a more detailed inspection?()
The shipboard oil pollution emergency plan will be invalid after ()
The Port State Control officer may witness a fire drill carried out by the crew assigned to these duties on the()
() is not installed on the main switchboar.
Which of the diesel engine components listed increase air density and helps to improve engine operating efficiency?()
The condensers located in various stages of a flash evaporator are cooled by()
By comparing the exhaust gas temperature of each cylinder, the operator can determine if the load is balanced throughout the engine. The device most commonly used is a()
As soon as a diesel engine has started, which of the listed engine operating parameters should be checked FIRST?()
The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated()