A.bimetallic type
B.diaphragm type
C.bourdon tube type
D.resistance-temperature type
您可能感兴趣的试卷
你可能感兴趣的试题
A.evaporator coils
B.liquid strainer
C.compressor
D.condenser
A.suction side of a bilge pump
B.exhaust manifold of an auxiliary diesel
C.discharge line from an air compressor
D.chemical feed tank of an evaporator
A.They should always be started with the discharge valve closed
B.They should always be started with the discharge valve opened
C.A priming pump is always required to flood the impeller suction
D.They should always be started with the sealing line valves closed
A.compressor damage from improper lubrication
B.refrigerant absorption by the lubricant
C.increased viscosity in the lubricant
D.carbon deposit on the compressor suction valves
A.Spring-centered valve
B.Unloading valve
C.Three-position valve
D.Two-position valve
A.Expansion valve
B.Condenser
C.Evaporator
D.Compressor
A.The condenser and the expansion valve
B.The king valve and the solenoid valve
C.The compressor and the expansion valve
D.The condenser and the solenoid valve
A.temperature and pressure
B.humidity and temperature
C.pressure and vacuum
D.pressure and humidity
A.capacity of 0%
B.efficiency of 100%
C.internal slippage of 0%
D.shut off horsepower rating of 100%
A.series of baffles
B.crossover pipe
C.condensate separator
D.drain pump
最新试题
Who is responsible for ensuring that someone is assigned to close the watertight doors in an emergency?（）
The rate of heat transfer from a hot region to a cold region is affected most by the （）.
The major source of chemical contaminants in hydraulic fluid is （）.
The control mode in which the final control element is moved from one of two flexed positions to the other is known as （）.
An internal bypass is provided on some hydraulic system suction strainers to help reduce the possibility of （）.
If the relief valve on the discharge side of a hydraulic pump lifts, the cause could be （）.
When the steering gear is in operation, you should （）.
A pressure drop through the refrigerant liquid line may cause （）.
If the viscosity of the liquid being transferred remains constant as the discharge pressure increases, the rotary pump （）.
A salinity indicator is used to determine the （）.